Press Release Archives

Santa Rosa, CA, February 28, 2019 - EndRun Technologies announced the availability of the next generation, e-Series Distribution Chassis that adds a secure, integrated network management interface. The e-Series Distribution Chassis maintains the industry leading frequency, pulse, and… Read Full Article

Santa Rosa, CA, February 28, 2019 - EndRun Technologies has announced the availability of the Meridian II 2U Precision TimeBase a metrology grade time and frequency standard traceable to UTC(USNO). This addition to the Meridian II product family introduces an Ultra-Stable Rubidium oscillator option, increased output capacity, and… Read Full Article

Santa Rosa, CA, March 13, 2018 - EndRun Technologies announced at Satellite 2018 a new Cesium Control Module for the Meridian II Precision TimeBase that combines the extraordinary benefits of GPS, 5071A Cesium Primary Frequency Standard, and Ionospheric Corrections. The unique and powerful integration of these technologies provides a time and… Read Full Article

Santa Rosa, CA, January 31, 2017 - EndRun Technologies announced today, at the Precision Time and Time Interval Systems and Applications (PTTI) meeting, the release of the RTM3205 Precision Timing Module for portable time and frequency applications. The second generation RTM3205 is optimized for size, weight, and… Read Full Article

Santa Rosa, CA, January 5, 2017 - EndRun Technologies today announced the availability of the Real-Time Ionospheric Corrections (RTIC) option for the Meridian II Precision TimeBase. The RTIC option directly measures and removes the ionospheric delay to GPS signals within a single frequency L1 timing receiver that is an… Read Full Article

Santa Rosa, CA, September 16, 2015 - EndRun Technologies today announced the Tycho II Precision TimeBase, a new time and frequency standard that delivers an industry-best price/performance. Tycho II references the Global Positioning System (GPS) to provide exceptional time (25 nanoseconds to UTC) and frequency (&… Read Full Article

Santa Rosa, CA, August 19, 2015 - EndRun Technologies today announced the new Meridian II Precision TimeBase that sets a new standard in time and frequency performance. The Meridian II references the Global Positioning System (GPS) to provide ultra-accurate time (10 nanoseconds to UTC) and… Read Full Article

Santa Rosa, CA, November 1, 2013 - EndRun Technologies today announced the availability of the new Sonoma N12 Time Server for Network Time Protocol (NTP) and Precision Time Protocol (PTP/IEEE-1588) applications. The Sonoma N12 is part of the Sonoma series of Network Time Servers using… Read Full Article

Santa Rosa, CA, April 16, 2013 - EndRun Technologies today announced the availability of its third generation time server - the new Sonoma D12 Time Server for Network Time Protocol (NTP) and Precision Time Protocol (PTP/IEEE-1588) applications.  Available using either GPS or CDMA… Read Full Article

Santa Rosa, CA, September 15, 2011 - EndRun Technologies today announced new Japanese, South Korean, and Hong Kong CDMA frequency assignments are now supported by all current CDMA timing products.  Adding the ability to decode the new frequencies allows EndRun's CDMA receiver to… Read Full Article

Santa Rosa, CA, August 30, 2011 - EndRun Technologies today announced the availability of the IEEE 1588-2008 (PTPv2) option for the Meridian, Tempus LX and Unison product lines.  Adding PTPv2 transforms the functionality of these products into the next generation IEEE-1588 Grandmaster Clock. Enhancing the… Read Full Article

Santa Rosa, CA, November 8, 2010 - EndRun Technologies today announced that it will present a paper at the 42nd Annual Precise Time and Interval (PTTI) Meeting on November 17, 2010 at the Hyatt Regency Reston Town Center in Reston, Virginia. Presented will be a paper entitled "… Read Full Article

Santa Rosa, CA, October 14, 2010 - EndRun Technologies today announced a second-generation CDMA Timing Module that includes enhanced features and capabilities.  The new Praecis II has been developed with over a decade of experience and includes improvements that have been implemented in EndRun's other high-… Read Full Article

Santa Rosa, CA, September 16, 2010 - EndRun Technologies today announced that a Secure Web Interface is available for the Meridian, Tycho, Tempus LX and Unison product lines.  This fast and easy-to-use graphical interface, that is compliant with any standard Web browser, is operating system… Read Full Article

Santa Rosa, CA, June 22, 2010 - FSMLabs, a premier provider of enterprise real-time and timekeeping technology, and EndRun Technologies, a manufacturer of time and frequency equipment, today announced a solution that leverages the global CDMA wireless… Read Full Article

Santa Rosa, CA, September 14, 2009 - EndRun Technologies today announced the availability of the worlds first CDMA-Synchronized IEEE-1588 Grandmaster Clock.  PTP is the Precision Time Protocol which operates on Local Area Networks (LANs).  It delivers greater network client synchronization accuracy than the most-… Read Full Article

Santa Rosa, CA, June 5, 2009 - EndRun Technologies today announced the development of a Telecom Clock Option for its Meridian Precision GPS Timebase.  The Meridian provides the most accurate and stable GPS-synchronized outputs in the world and is used in military communications, aerospace, broadcast, engineering and calibration… Read Full Article

Santa Rosa, CA, March 4, 2009 - EndRun Technologies today announced the development of an indoor transmitter component for its AFL3430 Antenna Fiber Optic Link.  The AFL3430 is used in GPS receiver installations that require very long cable runs, enhanced lightning protection, or RED/BLACK Tempest isolation… Read Full Article

Santa Rosa, CA, February 20, 2009 - EndRun Technologies today announced the Low-Phase-Noise Ultra-Stable Quartz Oscillator (US-OCXO) for the Meridian Precision GPS TimeBase.  The US-OCXO was designed specifically to provide 1,5,10MHz Ultra-Low-Phase-Noise outputs with close-in phase… Read Full Article

Santa Rosa, CA, August 12, 2008 - EndRun Technologies today announced that its CDMA product line is now available for use in India.  The industry-leading Tempus LX and Unison Network Time Servers with CDMA provide NTP where other time servers cannot.  EndRun is the pioneer in developing timing products that use CDMA as a… Read Full Article

Santa Rosa, CA, December 7, 2007 - EndRun Technologies today announced the introduction of the FDC3302 Frequency Distribution Chassis.  Very high isolation and low-phase noise specs, broad bandwidth, intelligent switching and network connectivity make the FDC3302 a Distribution Chassis with the best combination of features available on the… Read Full Article

Santa Rosa, CA, December 6, 2006 - EndRun Technologies today announced the introduction of the AFL3430 Fiber Optic Link. The AFL3430 system converts an RF signal to light, transmits it up to 5 kilometers (3 miles) and then reconverts it back to RF.  It can support broadband transmission from 50-2500 MHz. … Read Full Article

Santa Rosa, CA, August 31, 2005 - EndRun Technologies was enlisted by the United States Navy to develop an ultra-precise GPS Timing Module for its Shipboard Acoustical Receiver Transmitter System (SARTS).  Synchronization is the critical factor involved in a system like SARTS and signals from Timing Modules aboard Navy… Read Full Article

Santa Rosa, CA, March 29, 2005 - EndRun Technologies today announced the Meridian Precision GPS TimeBase.  The Meridian uses the Global Positioning System (GPS) to provide highly accurate time and frequency signals.  Applications include test and measurement, data acquisition, power utilities, range… Read Full Article

Santa Rosa, CA, November 22, 2004 - EndRun Technologies today announced the introduction of the Japanese Tempus LX CDMA Network Time Server.  The high-performance Tempus LX is a standalone Stratum 1 NTP time server for TCP/IP-based networks and will deliver accurate time throughout any… Read Full Article

Santa Rosa, CA, November 17, 2004 - EndRun Technologies today announced the introduction of the Tempus LX Network Time Server.  The new high-performance Tempus LX is a standalone Stratum 1 NTP time server for TCP/IP-based networks and will deliver accurate time throughout any system running an NTP or… Read Full Article

Santa Rosa, CA, October 1, 2002 - EndRun Technologies is proud to announce the release of their security-enhanced network time servers.  These products utilize the ultimate in authentication and encryption protocols, making them the most secure time servers in the industry. Everyday an increasing number… Read Full Article

Santa Rosa, CA, September 23, 2002 - EndRun Technologies announces the release of their CDMA2000-capable software for all their CDMA-based products.  Over the next 18-24 months many mobile communications providers will begin to implement the enhanced CDMA2000 format in their cellular transmissions.  The extended… Read Full Article

Santa Rosa, CA, February 5, 2002 - EndRun Technologies today introduced their new GPS-based network time server, the Praecis Gntp.  It is the first full-featured, rackmount time server in the industry to operate with window-mount GPS antenna technology.  The proprietary satellite tracking and oscillator disciplining algorithms are exclusive to the… Read Full Article

Santa Rosa, CA, January 10, 2001 - EndRun Technologies today announced a new breakthrough product based on their "Indirect GPS" Timing Technology – the Praecis Cntp.  It is used to synchronize clocks on servers and workstations across entire enterprise networks.  Accurately synchronized clocks are critical for… Read Full Article

Santa Rosa, CA, October 12, 2000 - EndRun Technologies began shipping its new timing products based on cellular wireless CDMA technology. The Praecis products are the first, low-cost, CDMA-based timing products in the industry.  Like cellular telephones, Praecis operates reliably inside buildings.  By contrast, traditional GPS… Read Full Article

Santa Rosa, CA, May 4, 2000 - EndRun Technologies, a new player in the time and frequency instrumentation arena, announces today the completion of the development phase of their Praecis family of time and frequency products.  They expect production quantities of the products to be available in the late third quarter time frame… Read Full Article