Digital Wall Clocks
NTP-Synchronized Digital Clocks Provide Highly Visible Time
Time Display
Mount this Digital Wall Clock in your data center or office.  It keeps perfect time and the 4-inch numbers are easily visible from over 150 feet away.  The Digital Wall Clock gets its time updates automatically over the network using NTP (Network Time Protocol).

Installation is easy.  Just mount the digital clock on the wall, plug it into an ethernet jack on your network and the address will be automatically set by DHCP.  Then use Telnet to set up the NTP server address and that's it.  You can also use Telnet to alter any settings such as the 12/24-Hour Mode.  Specifications are:

  • PoE - Power over Ethernet (IEEE 802.3af).  (A power supply is available if you don't have the PoE standard in your network.)
  • Red LED seven-segment display with 6 digits for hours, minutes, and seconds.
  • 4-inch numerals, visible over 150 feet (50 meters).
  • Overall size is 17.5"W x 6"H x 2.25"D.
  • 10/100 Base-T Ethernet compatible.
  • DHCP required for initialization.
  • Telnet control for: IP configuration, NTP server address, Time zone offset from UTC, Daylight Saving Time, 12/24-hour format, Status reporting.
  • UL 1950, ETL Listed, CE Marked.
Synchronize your NTP Digital Wall Clock
with a secure time server inside your firewall.

Six-Digit Wall Clocks are $575 USD.
These Digital Wall Clocks are available as an accessory to our other equipment.  Email or call us (1-877-749-3878) for more information.
Copyright 2005-2009. All rights reserved.Site Map